|
ORDER TODAY: |
|
Big Sky Adapter Info -
Click Here The "Big sky Adapter" can be used on the Hitachi NV65, the Bostitch N66C-1, the MAX CN565S, and any other coil nailer that has a .702 to a .705 nose piece. INSTRUCTIONS: 1. Make sure that all three (3) set screws are screwed out far enough to allow the adapter to slide over the nose piece of the nail gun. 2. On the N65 HITACHI, the adapter set screws are positioned to go into the recessed ring around the nose piece. This allows approximately 1/8" of nose piece protruding beyond the adapter. This also allows the adjustable depth gauge to still function on the nailer. DO NOT OVER TIGHTEN THE SET SCREWS. 4. The "Big Sky Adapter (BSA-1)" can be used on the Hitachi NV65, the Bostitch N66C-1, the MAX CN565S, and any other coil nailer that has a .702 to a .705 nose piece. The "Big Sky Adapter (BSA-2)" can be used on the Hitachi NV 45AB2 nail gun. The "Big Sky Adapter (BSA-3) fits models Bostitch N66C-1, MAX CN565S, Hitachi NV65 or any other models with round nose piece of .702 to .705 nail gun for L.P. Smartside installation. Always hold the adapter back on the nose piece approximately 1/8" to allow the adjustable depth gauge to function on the nailer. Test the nail pattern to make sure that it is 1" from the top edge of the siding. Big Sky Adapter Key Benefits
Big Sky Adapter Pricing
All prices are subject to change without notice.
BIG SKY ADAPTERS INC. Ron Udall - ronu@jmlumber.com General & Sales Information: |
Send mail to
webmaster@bigskyadapter.com
with questions or comments about this web site.
|